Internal Corner (Satellite Dish) 2440mm

The Internal Corner (Satellite Dish Profile) is a PVC trim designed to provide a smooth, seamless transition between two PVC cladding panels at an internal corner. It enhances aesthetics, protects corners from damage, and prevents moisture ingress, making it ideal for bathrooms, kitchens, and commercial interiors.

Key Features & Benefits

• Neat & Professional Finish – Hides raw edges for a smooth, polished look.
• Impact Protection – Reinforces internal corners to prevent chips or cracks.
• Water-Resistant – Helps prevent water penetration in wet areas.
• Hygienic & Low Maintenance – No grouting required; easy to wipe clean.
• Quick & Easy Installation – Panels slot into the profile for a secure fit.

Where is the Internal Corner (Satellite Dish) Used?

• Bathrooms & Wet Rooms – Creates a waterproof join between cladding panels.
• Kitchens & Utility Rooms – Keeps corners clean and prevents moisture buildup.
• Commercial Interiors – Commonly used in hospitals, restaurants, and salons for a hygienic, easy-to-maintain finish.
• Garages & Workspaces – Adds durability to internal wall corners in high-traffic areas.

1. Measure & Cut the Internal Corner Profile
Measure the height of the internal corner where the trim will be installed.
Use a fine-toothed saw or utility knife to cut the profile to the correct size.
2. Prepare the PVC Cladding Panels
Ensure the panels are clean, dry, and cut to the right dimensions before installation.
Leave a small expansion gap if required (refer to manufacturer guidelines).
3. Fix the Internal Corner (Satellite Dish Profile)
Apply a thin bead of adhesive along the back of the profile.
Slot the first PVC panel into one side of the profile.
Slot the second panel into the opposite side, ensuring a snug fit.
4. Seal & Finish
If installing in a wet area, apply sealant along the edges for additional waterproofing.
Wipe off any excess sealant for a clean and professional look.

Maintenance & Cleaning

Wipe with warm soapy water and a soft cloth to remove dust or stains.
Avoid using abrasive cleaners or harsh chemicals to preserve the finish