1 part J section 2440mm

The 1-Part J Section is a PVC trim designed to provide a clean and professional edge finish for interior PVC cladding. It is primarily used to cap off exposed panel edges, giving a neat, seamless look while also offering water resistance and durability. Unlike the 2-Part J Section, this profile is a single-piece trim, making installation quick and simple.

Key Features & Benefits

• Neat & Professional Finish – Hides raw panel edges for a smooth look.
• Simple 1-Part Design – Easy to install without additional fixings.
• Water-Resistant & Durable – Helps prevent moisture ingress in wet areas.
• Lightweight & Low Maintenance – Wipe clean with a damp cloth; no grouting required.
• Versatile Application – Suitable for panel ends, starts, or exposed edges.

Where is the 1-Part J Section Used?

• Bathrooms & Wet Rooms – Creates a waterproof edge around cladding panels.
• Kitchens & Utility Rooms – Provides a clean, durable finish.
• Commercial Interiors – Ideal for restaurants, hospitals, and salons, where hygiene and easy maintenance are essential.
• Garages & Workspaces – Adds durability and protects panel edges from wear.

How to Install a 1-Part J Section on PVC Cladding

1. Measure & Cut the J Section
   Measure the length of the panel edge where the J Section will be fitted.
   Use a fine-toothed saw or utility knife to cut the trim to the required size.
2. Position the J Section
   Place the J Section along the exposed panel edge, ensuring a snug fit.
3. Fix the Panel into the J Section
   If using adhesive, apply a small amount inside the profile for extra hold.
   Simply slide or slot the cladding panel into the J Section, making sure it is straight.
   If needed, gently press the profile to ensure secure placement.
4. Seal & Finish
   In wet areas, apply a thin bead of sealant along the edges for added waterproofing.
   Wipe off any excess for a clean, polished look.

Maintenance & Cleaning

Wipe with warm soapy water and a soft cloth to remove dust or stains.
Avoid abrasive cleaners or harsh chemicals to preserve the finish.