2 part H section 3050mm

The 2-Part H Section is a PVC joining trim designed to seamlessly connect two PVC cladding panels, creating a smooth, professional finish while allowing for easy panel installation, removal, or replacement. Its two-part design makes it particularly useful for long-term installations where access may be required in the future.

Key Features & Benefits

• Seamless Panel Joining – Provides a clean, professional finish between cladding panels.
• 2-Part Design for Easy Installation & Removal – Panels can be inserted and removed without dismantling the entire wall.
• Water-Resistant & Durable – Helps prevent moisture ingress in wet environments.
• Strong & Secure Hold – Ensures panels stay in place with minimal movement.
• Low Maintenance & Easy to Clean – Wipe clean with a damp cloth; no grouting required.

Where is the 2-Part H Section Used?

• Bathrooms & Wet Rooms – Creates a waterproof join between two cladding panels.
• Kitchens & Utility Rooms – Provides a secure and durable panel connection.
• Commercial Interiors – Ideal for restaurants, hospitals, salons, and other areas needing easy-to-clean surfaces.
• Garages & Workshops – Used for long panel runs, ensuring durability in high-use spaces.

How to Install a 2-Part H Section on PVC Cladding

1. Measure & Cut the H Section
Measure the height or width of the panels where the H Section will be used.
Use a fine-toothed saw or utility knife to cut the profile to the required length.
2. Install the Base Part of the H Section
Fix the base section of the H profile onto the wall or supporting structure using adhesive or screws.
Ensure it is aligned properly for a seamless panel fit.
3. Insert the PVC Cladding Panels
Slot the first cladding panel into one side of the H Section.
Install the second panel into the opposite side, ensuring a snug fit.
4. Attach the Second Part of the H Section
Clip or screw the front section of the H profile onto the base part, locking both panels securely in place.
Ensure the join is smooth and flush for a professional finish.
5. Seal & Finish
If installing in a wet area, apply sealant along the joints to enhance waterproofing.
Wipe away any excess sealant for a clean, polished look.

Maintenance & Cleaning

Wipe with warm soapy water and a soft cloth to remove dust or stains.
Avoid abrasive cleaners or harsh chemicals to preserve the finish.